Installation guide



Wellav Technologies Ltd.
22
SMP260 Quick Installation Guide
V1.10-W
should be in the same IP section with IP address of the
equipment.
Subnet Mask Set Subnet Mark of the IP module
Gateway Set Gateway of the IP module
MAC Address MAC address of the IP module
Speed Mode
Set RJ45 connection speed mode. The speed mode support
100Mbit and 1000Mbit.
IGMP Version
Set IGMP Version for multicast. The IGMP version setting
should match the IGMP version of the switch in the network.
IP module-Input
The “Input” setting menu is to set the IP input function for receiving multicast/unicast IP
stream.
Pic-3.3-39