Installation guide



Wellav Technologies Ltd.
21
SMP260 Quick Installation Guide
V1.10-W
Pic-6-4
Parameters Description
Type Set each ASI port to be Input or Output.
Packet Size Set 188 or 204 packet size for outputs.
Mode Set ASI port into CBR or VBR for output.
Constant Rate(Mbit) Set constant bit rate for ASI output.
Max Rate(Mbit) Set max bit rate for ASI output.
Min Rate(Mbit) Set min bit rate for ASI output.
z TS/IP IN
IP module
Pic-6-5
In the ‘System’ setting menu, user need to set correct parameters for the IP module such as
the IP address, subnet Mask, Gateway, etc, so that the module can work normally in the
network.
Parameters Description
IP Address
Set IP address of IP module. The IP address of IP module is
used for communication with basic unit of the equipment that