Installation guide



Wellav Technologies Ltd.
19
SMP260 Quick Installation Guide
V1.10-W
Pic-6-3
Following are the key parameters:
Parameters Description
Channel Select a channel to configure its parameters.
Video Source To select the correct video source for the input.
Audio Source To select the correct audio source for the input.
Encode Mode Select CBR or VBR for the encoding mode.
Video Max Encode Rate
To set the Max encode rate for VBR mode. The range of
max encode rate is 2000 ~ 15000 Kbps.
Video Min Encode Rate
To set the Min encode rate for VBR mode. The range of
min encode rate is 2000 ~ 15000 Kbps.
Note: the min encode rate must be smaller than the
max encode rate.
Video Encode Rate
To set the encode rate for both VBR mode and VBR
mode. The range is 2000 ~ 15000 Kbps. Note: The
values of the video encode rate should be between
the max encode rate and the mix encode rate in CBR
mode.