Installation guide



Wellav Technologies Ltd.
18
SMP260 Quick Installation Guide
V1.10-W
6.3.1 Check “Status” tab
“Status” tab: by selecting this item, the NMS displays the current system operation data
status of the equipment. User can swtich between tab under the “Status” to check the
current working status of the equipment
Different colors of histogram indicate different meaning:①
Orange: the total input bit rate;
Blue: the effective input bit rate;
Yellow: the total output bit rate;
Green: the effective output bit rate;
Red: alarm indicator, it means the actual output bit rate (it’s proportional to the amount of the
programs you transfer from input port to output port in ‘Program Info’) is more than the
output bit rate of some channel you set in sub-board.
Communicate Status indicates the communication status between NMS an② d the
equipment.
Green: the communication is normal. All the parameters in NMS are updated according to
the equipment synchronously.
Red: the communication is abnormal. The parameters in NMS may be not updated in time.
You need check the network connection and restart the NMS.
6.3.2 Configure parameters of signal input modules
 CVBS/SDI IN
SD-Encoder_SDI/CVBS (MPEG-2) module