Installation guide



Wellav Technologies Ltd.
17
SMP260 Quick Installation Guide
V1.10-W
z Main Interface Introduction
After successful log on, the following screen will display:
Pic-6-2
The interface can be divided into four areas according to its functionality.
(1) Toolbar. It includes shortcut to change password and save setting etc.
(2) Equipment list. If more than a piece of equipment is connected to the NMS, the
equipment will be listed in this area by its IP address.
(3) Parameter setting and configuration area. The parameters of the equipment are
shown and configured here by selecting different tabs. This is the main operation area
of the NMS.
(4) Event information window.
6.3 Quick Configuration on Key Parameters