User`s manual

802.11n WLAN Gigabit Router User’s Manual

Figure 4: Overview of Hardware Connections

Step 1. Connect the Ethernet cable to WAN Port

Connect the RJ45 Ethernet cable from your xDSL/Cable

Modem's Ethernet port to 802.11n WLAN Gigabit Router's WAN

Port.

Step 2. Connect the Ethernet cable to LAN Port

Connect the supplied RJ45 Ethernet cable from your PC's

Ethernet port to any of the 4 802.11n WLAN Gigabit Router's

LAN Ports.

Step 3. Attach the power connector

Connect the power adapter to the power inlet “POWER” of the

802.11n WLAN Gigabit Router and turn the power switch

“ON/OFF SWITCH” of your 802.11n WLAN Gigabit Router on.

* Actual ANTENNA may vary depending on model