VOL Opus 300 Multi-Room System Installation Guide
Contents La version française de ce manuel est disponible sur le site: Important safety instructions........................................................................3 Eine deutsche Version der Bedienungsanleitung ist verfügbar unter: Planning your system....................................................................................6 La versión en español de este manual está disponible en: Pre-installation notes.................................................................................
Important safety instructions For safety reasons please read the following instructions and important safety information carefully before attempting to connect the Opus 300 Multi-Room System to the mains. Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The crossed-out wheeled bin is the European Union symbol for indicating separate collection for electrical and electronic equipment.
Important safety instructions continued Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the product and the operating instructions should be adhered to. Follow Instructions - All operating and use instructions should be followed.
Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Replacement Parts - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or have the same characteristics as the original part.
Planning your system It is suggested that you locate keypads: MCU300 location is critical. See opposite for details. • 138cm height from the floor finish (to centre of keypad) or taking into account light switch locations etc • 25-35cm away from the outer edge of any door frame or wall edge • Away from direct, bright sunlight which may affect infra-red performance When installing your Opus multi-room entertainment system, consideration should be given to detailed advance planning.
VSU300 Video Switching Unit AMR650 / OS165CC in-ceiling speakers The VSU300 video hub works in conjunction with the MCU300 to provide video signals to all connected zones, via 75 Ohm video cabling (RG6/CT100 co-axial cabling can be used). Up to six video input sources and a CCTV input may be connected and distributed, with their corresponding audio signals routed through the MCU300 as one of its dedicated six inputs.
Pre-installation notes Please read these notes before commencing installation. Wiring to zones Run a Cat-5e cable from the MCU300 to each wall control unit. MCU300 A-BUS Wall Control Unit A-BUS is a standard that allows some compatibility between different manufacturers A-BUS multi-room products. The MCU300 can be switched between Opus A-BUS or Standard A-BUS mode. The Opus A-BUS position is for use with our own Opus WCU300 keypad and gives extra functions.
WCU300 A-BUS Wall Control Unit WCU300 EU version Cat-5e cable The WCU300 EU version should be fitted into a standard single UK (square) 47mm deep back-box (the stainless steel/silver WCU300 EU should be fitted into a 50–60mm deep back-box/pattress). The WCU300 CU version should be fitted into a standard single US J-box. The Cat-5 cable running from the MCU300 is terminated at the 8-way colour-coded punch down connection on the rear face of the WCU300.
Pre-installation notes continued AMR650 / OS165CC in-ceiling speakers Standard installation would specify AMR650/OS165CC ceiling mounted speakers which are matched to the Opus 300 system for optimum audio performance. However, virtually any customer-specified speaker units may be used. Where ceiling or wall-mounted speakers are used, care should be taken to ensure that all building regulations are followed.
Audio connections PSA65U power supply to MCU300 For each MCU300 with up to four main zones connected (and no subzones) one PSA65U is required. Connections for one MCU300 with two main zones attached: OS165CC OS165CC Sub-zones require a separate PSA65U power supply. For each MCU300 (with both main and sub-zones connected) two PSA65U power supplies are required.
Video connections Where a VSU300 video switcher has been specified The VSU300 is linked to the MCU300 via a Cat-5e patch cable (supplied with the VSU300), connected to the expansion sockets on both units. This provides power, and input switching commands direct from the system remote control or WCU300.
Source connections Audio source connections Detail of audio connections between a tuner and MCU300: Audio Output It is possible to connect a total of six audio source components to the MCU300. The connections are made from a line level output on the source equipment to one of the six inputs on the MCU300 using RCA/phono to RCA/phono cables.
Sub-zones Sub-zone connections One MCU300 hub supports four main-zones and four sub-zones (eight rooms in total). Each sub-zone output is tied to a main zone output and always receives the same source as its main zone (A2 sub-zone output always receives the same source as A1, B2 always follows B1 etc).
Advanced system options Note: Full details of installation, connection, operation and special features can be found in the guide that accompanies the LIM300 module. The LIM300 Local Input Module (LIM) is an optional in-wall module that allows the user to add additional local sources to those distributed by the MCU300. Speaker cable WCU300 The local source may only be heard in the room where it is connected and the corresponding sub-zone (if connected) and is not distributed to other rooms.
Advanced system options continued AMR650 Active Speakers The AMR650 active speakers can be used where it is not desired to have a keypad fitted in the wall. The AMR650 active speakers feature an IR receiver and amplifier in one of the speakers and like the WCU300 keypad do not require mains power. 1. Using a single Cat-5e cable, connect the AMR650-A to the MCU300/VSU300 via an RJ45 plug at the MCU300, and the eight-way colour-coded punch down connection at the AMR650.
Connecting an external amplifier/active subwoofer to your system OS165CC Should extra amplification power, or, an active subwoofer be required, a line level pre-amp output is provided on the back of the WCU300. WCU300 Using high-quality audio interconnect cable, an external power amplifier may be connected to the WCU300 pre-amp output screw terminals.
Larger systems Linking units For large installations which require more than four main zones and four sub-zones, an MCU300 ‘linking’ facility is provided. Units are linked via a Cat-5e patch cable to the ‘Hub Link’ in and out sockets on the top right hand corner of each MCU300. Connections between MCU300 and VSU300 to allow eight main zones and eight sub-zones: MCU300 In order to share audio input sources with the first MCU300, the second may be joined using Opus C39 audio couplers (see diagram).
System specifications MCU300 VSU300 No. of source inputs 6 No. of source inputs 6 No. of loop outputs 6 No. of loop outputs 6 No. of external inputs/loop outputs/CCTV 1 Source input specification 75 Ohm, composite video No.
System specifications continued VOL WCU300 EU version CU version AMR650 Frequency response 20 Hz–20 Hz Frequency Response 60Hz - 20kHz (+/- 2dB) Volume control range - 80 dB 32 steps THD <0.
SRC300 Battery 2 AA/LR6 alkaline batteries Dimensions ( W x H x D ) 43 x 18 x 182mm (approx) VOL Weight 112g (inc batteries) LRC300 Battery OS165CC 4 AAA/LR03 alkaline batteries Frequency response 58Hz–20Hz +/- 3dB Dimensions ( W x H x D ) 65 x 25 x 190 mm (approx) Sensitivity 90 dB SPL @ 1 watt / 1 metre Weight Nominal impedance 4 Ohms Power handling 15–80 watts PSA65U Enclosure type In-ceiling infinite baffle Input 100-240V AC 50/60Hz Drive components 1 x 1.3 cm tweeter, 1 x 16.
FAQs 1. What entertainment equipment can I connect? 6. How many remote controls can the system have? The Opus 300 system is compatible with almost any type of hi-fi or video separate. There is no limit to the amount of remotes you can have. If required you can have a remote in each room. 2. What is the difference between a main zone and a subzone? 7. What advice can you give for keypad location? A sub-zone can only listen to the same audio source as is being listened to in the main zone.
Limited warranty Opus Technologies warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Opus Technologies will repair or replace (at Opus Technologies’ option) this product or any defective parts in this product. Warranty periods may vary from country to country. If in doubt consult your dealer and ensure that you retain proof of purchase.
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. If you notice any errors please feel free to email us at: info@opus.eu Copyright © Copyright Opus Technologies Ltd 2007 This document contains proprietary information protected by copyright. All rights are reserved.
