User guide

Phone Settings
41
Outgoing Line
Outgoing LineOutgoing Line
Outgoing Lines
ss
s
After the handset is registered to the base station, you can assign one or more outgoing
lines for the handset. The handset can only use the assigned outgoing line(s) to place
calls. When multiple outgoing lines are assigned to the handset, the handset uses the
first line as the outgoing line by default. You can change the default outgoing line of
the handset.
To change the default outgoing line of the handset:
4. Press to enter the main menu.
5. Select ->Telephony->Default Line.
The LCD screen displays all outgoing lines currently assigned to the handset. The
default outgoing line is highlighted and followed by a left arrow.
6. Press or to highlight the desired line, and press the OK soft key.
The default outgoing line is changed successfully.
Incoming Line
Incoming LineIncoming Line
Incoming Lines
ss
s
After the handset is registered to the base station, you can assign one or more
incoming lines for the handset. The handset can only receive incoming calls to the
assigned incoming line(s). You can assign incoming lines to all handsets registered to
the same base station on your handset.
To assign the incoming line to the handsets:
10. Press to enter the main menu.
11. Select ->Telephony->Incoming Lines.
12. Enter the system PIN (default: 0000).
13. Press the Done soft key.
The LCD screen displays all handsets registered to the base station. The handset
itself is highlighted and followed by a left arrow.
14. Press or to highlight the desired handset, and press the OK soft key.
15. Press or to select Accept from the desired line fields.
16. Press the Save soft key to accept the change.
17. Press the Back soft key to return to the previous interface.
18. Repeat the step 5-7 to assign incoming lines for other handsets.
If a line is assigned to multiple handsets as an incoming line, an incoming call to this
line will cause these handsets to ring simultaneously, but the incoming call can be
answered only by one of them.