User guide

User Guide W52P IP DECT Phone
32
filtered and display on the LCD screen.
To search for contacts in the local directory:
4. Press to enter the main menu.
5. Select .
6. Enter a few continuous characters of the desired contact name or number using
the keypad.
The contacts whose name or number matches the search will appear on the LCD
screen after a timeout or when the Search soft key is pressed. You can dial a
contact from the result list.
Placing a Call from Local Directory
Placing a Call from Local DirectoryPlacing a Call from Local Directory
Placing a Call from Local Directory
To place a call from the local directory:
5. Press to enter the main menu.
6. Select .
7. Press or to highlight the desired entry.
8. Do one of the following:
- If only one number of the contact is stored in the local directory, press to
dial out the number.
- If both the office number and the mobile number of the contact are stored in
the local directory, press the View soft key to display the two numbers.
Press or to highlight the desired number.
Press to dial out.
Blacklist
BlacklistBlacklist
Blacklist
You can store up to 30 numbers in the handset’s blacklist. You can add, edit or delete
numbers in the blacklist. You can also dial a call from the blacklist, but an incoming call
from a number in the blacklist will be rejected automatically.
To add an entry to the blacklist manually:
7. Press to enter the main menu.
8. Press ->Telephony->Caller Blacklist.
9. Press the Options soft key, and select New Entry.
10. Enter the desired number in the Phone Number field.
11. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also add an entry to the blacklist from the call history. For more information,
refer to Call History Management on page 35.