User manual

mPBX-100 User Manual
www.yeastar.com Page 95
doing this.
Step 4: Login to the device with the username ‘admin’ and the password
‘password’, in order to begin reconfiguring the device.
APPENDIX B How to Configure
Autobackup
Before Autobackup can be properly configured, an SMB share folder
accessible from MPBX must be set up on a Windows based machine. Once
that has been set up, please follow the steps below.
Step 1 Add a new folder, rename it, and set this new folder’s share
Properties according to Figure B-1
Figure B-1 Set up share Properties
Step 2 Enter the new folder and create a new text file, then rename this file
to status.txt. This step is very important, DO NOT forget to create the
status.txt file.