User manual

mPBX-100 User Manual
www.yeastar.com Page 89
via a PSTN line.
Note: Setting number prefix to wild card X and setting Strip to 0 digits from
the front will allow all calls to go through this outbound route.
5.1.2 Sample Routing via VoIP Trunk
Let’s configure all inside extensions to dial ‘0’ through the VoIP Trunk.
1. Add VoIP service provider
Before we do add this, please make sure you have a VoIP Trunk account.
Trunks VoIP Trunk  SIP Trunk
Enter your account information on this page, and click Save.
Figure 5-2