User manual

mPBX-100 User Manual
www.yeastar.com Page 67
your local network. Not recommended.
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device. In the SSH access, you can do more advance setting
and debug.
· Port: the default is 8022,
·Hostname
Set the host name for MPBX.
·IP Address
Set the IP Address for MPBX.
·Subnet Mask
Set the subnet mask for MPBX.
·Gateway
Set the gateway for MPBX.
·Primary DNS
Set the primary DNS for MPBX.
·Secondary DNS
Set the secondary DNS for MPBX.
·IP Address2
Set the second IP Address for MPBX.
·Subnet Mask2
Set the second subnet mask for MPBX.