User manual

mPBX-100 User Manual
www.yeastar.com Page 62
Give this DISA application a name to help you identify it.
·PIN #
The password for this DISA .
·Response Timeout
The maximum amount of time the system will wait before hanging up the call if
the user has dialed an incomplete or invalid number. Default is 10 seconds.
·Digit Timeout
The maximum amount of time permitted between each digit when the user is
dialing an extension number. Default is 5 seconds.
2) Member Outbound Routes
Used to set the outbound routes that can be accessed from this DISA .
3.5.8 Conferencing
Conference Calls increase employee efficiency and productivity, and provide a
more cost-effective way to hold meetings.
·Extension
This is the number dialed to reach this Conference Room.
·Pin #
Set a PIN # that must be entered in order to access this conference room (i.e.
1234).
Figure 3-37
3.5.9 Paging Groups
Paging is used to make an announcement over the speakerphone to a phone or
group of phones. Targeted phones will not ring, but instead answer immediately
into speakerphone mode. Please note that this section is for configuring paging
groups. If you would like to configure Intercom settings, please open the Other
Settings -> Feature Codes screen.
This feature is supported by the following SIP phones:
Yealink's T28, T26, T22, T20, T10T, T9CM. Other SIP devices may also work
with this feature but are not officially supported.