User manual

mPBX-100 User Manual
www.yeastar.com Page 60
The IP address or hostname of an SMTP server that the MPBX will connect to in
order to send voicemail messages via email, i.e. mail.yourcompany.com.
·Port
SMTP Port: the default value is 25.
·Use SSL/TLS to send secure message to server
If the server of sending email needs to authenticate the sender, you need to
select the check box.
Note: Must be selected for Gmail or exchange server.
After filling out the above information, you can click on the Test Account
Settings’ button to check whether the setup is OK.
1) If the test is successful, you can use the email safely.
2) If test failed, please check the above information is correct or network is
proper.
Figure 3-34
3.5.7 DISA
DISA (Direct Inward System Access) allows someone calling in from outside the
telephone switch (PBX) to obtain an ‘internal’ system dial tone and make calls as
if they were using one of the extensions attached to the telephone switch. To use
DISA, a user calls a DISA number, which invokes the DISA application. The DISA
application in turn requires the user to enter a PIN number, followed by the
pound sign (#). If the PIN number is correct, the user will hear dial tone on