User manual

mPBX-100 User Manual
www.yeastar.com Page 6
2. System set up
2.1 Connection Drawing
Figure 2-1
2.2 Connecting Ethernet Line
MPBX provides two 10/100M Ethernet ports with RJ45 interface and LED
indicator. Plug Ethernet line into MPBX’s Ethernet port, and then connect
the other end of the Ethernet line with a hub, switch, router, LAN or WAN.
Once connected, check the status of the LED indicator. A yellow LED
indicates the port is in the connection process, and a green LED indicates the
port is properly connected.
2.3 Supplying Power
MPBX utilizes the high-performance switch power supply, which supplies the
required power for the unit.
PSTN
PSTN
Normal
IP
601
602
603
604
FXS LAN
IP
Soft
Route
GSM