User manual

8820IP Phone User Manual_ SIP (V1.44)

or router and powered up; 2: use PPPoE mode. Those ADSL and

Cable Modem users please select this item for it is a protocol

especially designed for them. With this system, ADSL ISP

automatically assigns all the required IP parameters to any device

connected to it when the device log on; 3: use modem mode.

Those who use IP phone with modem, please set the value as 3.

set pppid XXX

With iptype set as 2, use this command to set ADSL ID; with iptype

set as 3, use this command to set Modem ID.

set ppppin XXX

With iptype set as 2, use this command to set ADSL pin; with

iptype set as 3, use this command to set Modem pin.

set ip XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set IP address of

PA168X IP phone.

set subnetmask XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set subnet mask of

PA168X IP phone.

set router XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set router IP of network

with PA168X IP phone.

set dns XXX.XXX.XXX.XXX