User manual

8820IP Phone User Manual_ SIP (V1.44)

PA168X SIP Phone Telnet Setup Guide

When PA168X SIP phone is properly installed, you can set each

parameters through PC and Telnet commands.

Details please refter to 《PA168X SIP phone Spec and Install》

Ø Telnet Configuration

● On the PC choose Start>Run, and then type telnet 192.168.1.100 into

Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the

DOS window. Then the following information will be displayed.

PA168X V1.44 settings

Password :

Then please type password. With debug is set as 0[disable], if type ordinary

password (default one is 1234), after Retun, you will see：

Password : ****

P:\>

If you type super password, then you will see:

Password : ********

P:\>

Above information indicates that IP phone is under setting mode, and then you

can set the PA168X IP phone by using the telnet commands.