User manual

8820IP Phone User Manual_ SIP (V1.44)

Fig 1.7 Setting Page using ordinary pin with Debug set as 0 [disable]

● Save Settings : Click this button to save the configuration and the phone

will reboot. Once the phone reboots successfully, the new configuration is

effective.

Note After entering set page, if save settings button is not clicked within 10 minutes,

then when you click it again, the index page asking for pin will pop up again.

Then please input the password again to enter the set page and then click

save settings button to confirm the modification.

● Adress Book: Click this button to open the speed dial settings page.

Please refer to Fig 3.7. In this page, you can set and save the speed dial

number by typing the name into the Name field and then entering the

corresponding number following the name. For example, input Jack in