User guide

17
3.9 Key Tone
_______________________________________________________________________________
When you press a button on the IP8820 phone, the phone will generate a beep tone to indicate that the
button has been pressed. This key tone is optional and can be enabled or disabled using the key tone
setting.
To enable/disable Key Tone operation:
o Press the Setting ( ) .
o Dial 3, or move the cursor to 3.Phone Settings using the Previous Next softkeys and press the
OK softkey.
o Dial 10, or move cursor to 10.Key Tone using the Previou ext softkeys and press the OK
softkey
o Press the Ysoftkey to enable Key Tone, or press the softkey to disable Key Tone.
o Move to another parameter with the navigation buttons and continue the session or press the Setting ( )
button to exit the configuration session.
3.10 Language Setting
_______________________________________________________________________________
The IP Phone firmware includes an xml file, which, among other things, determines the languages
available to the phone. The Language setting determines the display of text in the LCD. When the xml
file contains more than one (1) language, you may select the language shown in the display.
To select an available language:
o Press the Setting ( ) button.
o Dial 3, or move cursor to 3.Phone Settings using the PreviousNext softkeys, and press the OK
softkey.
o Dial 11, or move cursor to 11.Language using the softkeys, and press the K
softkey.
o Select a Language from the list using the Previousex softkeys, and press the O K softkey. An
asterisk, , displays in front of the current selection.
o Move to another parameter with the navigation buttons and continue the session or press the Setting ( )
button to exit the configuration session.