User guide

16
3.7 Lock Outgoing Call
_______________________________________________________________________________
The IP Phone can be configured to allow outgoing calls only if a password is entered. When enabled, the LCD screen
will display the password request and the pad-lock icon is shown, and the password must be entered prior to
connecting an outgoing call.
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD password.
To enable/disable the Lock Outgoing Call feature:
O Press the Setting ( ) button.
O Dial 3, or move the cursor to 3.Phone Settings using the PreviousNext softkeys and press the OK softkey
O Dial 8, or move cursor to 8.Lock Outgoing Call using the PreviousNextsoftkeys and press the OK softkey.
O Press the softkey to enable Lock Outgoing Call, or press the N o softkey to disable Lock Outgoing
Call.
O Move to another parameter with the navigation buttons and continue the session or press the Setting ( )
button to exit the configuration session.
3.8 Enabling Speed Number Dialing
_______________________________________________________________________________
Enabling Speed Number Dialing
The LG 8820 IP Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record includes a
two-digit Speed number, see Speed Number Dialing. When enabled, dialing the Speed number (00~99) sends the
contact number or user id from the associated Phone Book record.
To enable/disable Speed number operation:
O Press the Setting ( ) button.
O Dial 3, or move the cursor to 3.Phone Settings using the softkeys and press the softkey.
O Dial 10, or move cursor to 10.Key Tone using the Pre ext softkeys and press the O sofftkey.
O Press the s softkey to enable Key Tone, or press the Nsoftkey to disable Key Tone.
O Move to another parameter with the navigation buttons and continue the session or press the Setting ( )
button to exit the configuration session.