User guide

11
3.4. Enabling Automatic Headset Operation
_________________________________________________________________________________
Your IP8820 Phone supports use of a headset with a standard RJ-11 jack. In the Headset Auto Mode,
pressing a line button automatically connects audio to the headset. Also, redial, Speed dial, Speed
number dialing and click-to-call place calls with audio through the headset.
To enable Headset Auto Mode:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the softkeys and press the
OK softkey.
o Dial 4, or move the cursor to 4.Headset Auto Mode using the softkeys and press
the softkey.
o Press the esoftkey to enable the Headset Auto Mode or press the softkey to disable the
Headset Auto Mode.
:
3.5 Setting Flexible Buttons
_________________________________________________________________________________
Your IP8820 Phone has twelve (12) flexible buttons. Normally, the first two (2) buttons are for your line.
The flexible buttons not assigned as line buttons can access various functions. The table below indicates
the available functions with a brief description of each.