User guide

10
To set the ring type for a line:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the softkeys and press the softkey.
o Dial 2, or move the cursor to 2.Ring Setting using the softkeys and press the OK softkey
o Dial the line number plus 1 (for line 1 dial 2 for line 2 dial 3, etc.), or move the cursor to 2.Line n
Configuration using the softkeys to select the line number n and press the OK softkey.
O Dial 1, or move the cursor to 1.Ring Type using the softkeys and press the OK softkey.
Note the line number displays in parenthesis after “Ring Type”.
O Select the ring type using the Next softkey. Press the a softkey to hear the selected tone. An asterisk,
, displays in front of the current setting.
O Press the softkey to save your entry.
O Move to another parameter with the navigation buttons and continue the session or press the
Setting ( ) button to exit the configuration session.
3.3 Ringer Off
The IP Phone can be programmed not to ring when an incoming call is received.
To set delayed ring for a line:
O Press the Setting ( ) button.
O Dial 3, or move the cursor to 3.Phone Settings using the softkeys and press the OK softkey
O Dial 3, or move the cursor to 3.Ringer Off using the Previous-Next softkeys and press the OK softkey.
O Press the softkey to enable Ringer Off, or press the softkey to disable Ringer Off.
O Move to another parameter with the navigation buttons & continue session or press the Setting (
button to exit the configuration session.
.