User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２６ of 35 Ver 2.1
7.1.4 Emergency Help
Press [Emergency
] button on keypad, or [ ] button on remote
controller or wireless panic button, the main unit will alarm and make call to
the preset user numbers.
7.2 Answer Alarm Call
When the main unit sounds alarm, it will dial the preset numbers. If no one
answers the call, the system will call the next user number automatically.
The system will call each preset numbers for 3 times in order.
If you answer the call, you will hear the pre-record voice. You can set
system via your telephone or mobile phone keypad.
If you hang-up directly without answering the call, the system will call each
preset number for 3 times circularly.
Press [*]: Read the alarm information.
Press [1]: Main unit stops alarming and Arm; it stops calling users.
Press [2]: Main unit stops alarming and Disarm; it stops calling users.
Press [3]: Siren off and monitors the scene for 30 seconds; for continued
monitoring, press [3] again to monitor for another 30 seconds.
Press [4]: Main unit starts a 30-second two-way intercom. It cannot be
controlled by the mobile during the time of intercom.
7.3 Remote Control
Dial the number associated to the alarm main unit by phone (mobile phone),
and after one ringing cycle, you can hear a voice prompt “Please enter
password”. If the password is right, you will here “Press 1 to arm, Press 2 to
disarm, Press 3 to Monitor, Press 4 to Intercom”. If the password is wrong,
you will hear a prompt voice “wrong password, please re-enter”.
Press [1]: arm, if finished successfully, you will hear a voice prompt
“System armed”.