User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２５ of 35 Ver 2.1
7.1.2 Disarm
It means to stop the alarm when the main unit sounds the alarm or make
the alarm system in the state of non-warning. After disarming, even if you
trigger the detector, the main unit would not sound alarm (excluding
24-hour defense areas).
Use keypad to input system password, then press [#] button. [Out Home]
or [At Home] lights will be off. It means disarm setting successful.
Remote Control Operation: Press [
] button on remote controller
Main Unit Operation: input system password + [#]
LCD display:
7.1.3 Home Arm
It means, for the safety, while somebody is at home, you need to enable
the peripheral door, window, balcony and boundary detectors of the alarm
system while prevent from triggering the indoor detectors, which may
cause improper warning; then, you shall select Arm at Home, let just part of
the detectors work and disable the other parts.
Main Unit Operation: Press [At Home
] button on keypad
Remote Control Operation: Press [ ] button on remote controller
LCD display: