User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２３ of 35 Ver 2.1
6.14 Siren Setting
In setup state, use keypad to input [75]; in the operation of arm/ disarm
by remote control, select if the siren sounds or not by [0/1] button, and
then press [#] to confirm. The main unit will emit a long beep and a
voice prompt “setting completed”.
Operating method: [75]
➩[A]➩[#]
A indicates: [0] Siren off; [1] Siren on; System default: [0] Siren off
For example: set siren on when arm/ disarm
Operating method: [75]
➩[1]➩[#]
LCD display:
1
6.15 Siren Setting in “Emergency Help” mode
In setup state, use keypad to input [76], and then [1/0], finally press [#] to
confirm. The main unit will make a long beep and a voice prompt “setting
completed”.
Operating method: [76]
➩[A]➩[#]
A indicates: [0]: siren off in “Emergency Help” mode
[1]: siren on in “Emergency Help” mode
System default: [0] siren off
7. Operation Instructions