User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２２ of 35 Ver 2.1
For example: set defense zone 12 to be 24-hour, fire alarm and siren on
Operating method: [60]
➩[12]➩[3]➩[2]➩[1]➩[#]
6.12 Home Arm Defense Zone Setting
If you want some detectors work and some do not, you can use [Home
Arm] function.
In setup state, use keypad to input [61], then choose the corresponding
defense zone number [01~99], then choose [Home Arm], and then choose
whether alarm [0/1] button, and finally press [#] to confirm. The main unit
will make a long beep and a voice prompt “setting completed”.
Operating method: [61]
➩[XX]➩[A]➩[#]
XX indicates: [01~99] is defense zone 1 to defense zone 99
A indicates: [0] Home arm but not alarm
[1] Home arm and alarm
For example: set defense zone 11 to be Home arm and alarm
Operating method: [61]
➩[11]➩[1]➩[#]
For example: set defense zone 12 as Home arm but not alarm
Operating method: [61]
➩[12]➩[0]➩[#]
6.13 Voice Recording
In setup state, use keypad to input [701], and then press [#] to confirm.The
main unit will emit a beep and the [
] indicator is on, and after 10
seconds countdown, recording starts: record at 30cm away from the main
unit with moderate tone; 10 seconds later, the main unit will make a beep
indicating the recording stops and the recorded voice will replay.
Operating method: [701]
➩[#]
LCD display: