User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２１ of 35 Ver 2.1
Operating method: [57]➩[138222222]➩[#]
6.10.1 Delete SMS Alert Target cell phone number
In setup state, use keypad to input [57] ~ [59], and then press [#] button to
confirm. The main unit will make a beep, the [Signal] indicator will flicker
once and you will hear “delete completed”, which indicate SMS number is
deleted successfully.
Operating method: [XX]➩[#]
XX indicates: address codes of message-receiving numbers from the
first group to the third group [57] ~ [59]
For example: delete the first SMS user number from the system
Operating method: [57]
➩[#]
6.11 Defense Zone Programming
If you want to change the alarm attribute of defense zone, such as turn off
the siren when system alarms, you can do it by defense zone programming.
In setup state, first input [60], then the defense zone number [01~99], then
input defense zone type [1~4], then input defense zone location number
[1~8], and then select siren on/off [0/1], at last press [#] to confirm. You will
hear the main unit emit a long beep and a voice prompt “setting
completed”.
Operating method: [60]
➩[AA]➩[B]➩[C]➩[D]➩[#]
AA: defense zone number [01~99] means zone 1 to zone 99;
B: defense zone type
[1]: real-time defense zone [2]: 40 seconds delay defense zone
[3]: 24 hours defense zone [4]: bypass defense zone
C: defense zone location
[1] SOS Alarm [2] Fire Alarm [3] Gas Leak Alarm
[4] Door Alarm [5] Hall Alarm [6] Window Alarm
[7] Balcony Alarm [8] Boundary Alarm
D: siren ON/OFF: [0] OFF, [1] ON