User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２０ of 35 Ver 2.1
6.9.2 Delete alert target phone number
In setup state, input [51] ~ [56], and then press [#] to confirm, the main unit
will make a long beep and the [Signal] indicator will flicker once and you
will hear “delete completed”, which indicate the alarming user number is
deleted successfully.
Operating method: [XX]
➩[#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
For example: Delete the third alarming user number from the system.
Operating method: [53]
➩[#]
LCD display:
6.10 SMS Alert Target cell phone number
6.10.1 To set SMS Alert Target cell phone number
SMS Receiving number means when system is alarming, it will only send
SMS to this mobile number. You can set maximum 3 SMS numbers. In
setup state, input [57] ~ [59], then input the SMS receiving number, and
then press [#] button to confirm. The main unit will make a beep, the
[Signal] indicator will flicker once and you will hear “setting completed”,
which indicate setup successfully.
Operating method: [XX]
➩[YY…YY]➩[#]
XX indicates: address codes of message-receiving numbers from the
first group to the third group [57] ~ [59]
YY…YY indicates: the SMS receiving number
For example: setup 13822222222 as the first SMS receiving number