User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page １８ of 35 Ver 2.1
6.8 Timing Settings
6.8.1 Timely Arm
In setup status, use keypad to input [33~35], then input the hour [AA] and
minute [BB] of the time you want to set to arm, and finally input [#] to
confirm. You will hear a long beep and a voice prompt “setting completed”.
Operating method: [XX]
➩[AA]➩[BB]➩[#]
XX indicates: the address code 33, 34, 35 of the timely arming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example: set the arm time as 45’ 10pm
Operating method: [33]
➩[22]➩[45]➩[#]
LCD display:
6.8.2 Timely Disarm
In setup status, use keypad to input [36~38], then input the hour [AA] and
minute [BB] of the time you want to set to disarm, and finally input [#] to
confirm. You will hear a long beep and a voice prompt “setting completed”.
Operating method: [XX]➩[AA]➩[BB]➩[#]
XX indicates: the address code 36, 37, 38 of the timely disarming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example: set the arm time as 55’ 7am
Operating method: [33]
➩[22]➩[45]➩[#]
LCD display: