User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page １７ of 35 Ver 2.1
In setup status, use keypad to input [31], then input the 4-digit new
password, and then press [#] to confirm. The main unit will make a long
beep and you will hear a voice prompt “setting completed”.
Operating method: [31]
➩[XXXX]➩[#]
XXXX indicates: the new 4-digit password
For example: change the system password to 2846
Operating method: [31]
➩[2846]➩[#]
LCD display:
Note：the operation password and the programming password can not
be set as the same number.
6.7 Clock Setting
In setup status, use keypad to input [32], then input the last 2 digits [AA] of
the present year, the two digits [BB] of the month, the two digits [CC] of the
date, the two digits [DD] of the hour (24-hour system), the two digits [EE] of
the minute, the two digits [FF] of the second, and finally enter [#] to confirm.
You will hear a long beep and a voice prompt “setting completed”.
Operating method: [32]
➩[AA]➩[BB]➩[CC]➩[DD]➩[EE]➩[FF]➩[#]
AA indicates: the last 2 digits of the present year
BB indicates: the 2 digits of the present month
CC indicates: the 2 digits of the present date
DD indicates: the 2 digits of the present hour
EE indicates: the 2 digits of the present minute
FF indicates: the 2 digits of the present second
For example: set the time as 15:35:40, Oct. 1st, 2009
Operating method: [32]
➩[09]➩[10]➩[01]➩[15]➩[35]➩[40]➩[#]