User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page １６ of 35 Ver 2.1
6.5.2 Delete Defense Zone
The wireless detector can’t control the main unit after it’s deleted.
In setup state, use keypad to input [24], then input the defense zone
number you want to delete [01~99], and then input [#] to confirm. The main
unit emits a long beep and the defense zone indicator flickers once. You
will hear a voice prompt “delete completed”.
Operating method: [24]
➩[XX]➩[#]
XX indicates: 01 ~99 defense zones number
6.6 Change passward
6.6.1 Change Operation Password
Operation password is the password used to disarm or remote control.
In setup status, use keypad to input [30], then input the 4-digit new
password, and then press [#] to confirm. The main unit will make a long
beep and you will hear a voice prompt “setting completed”.
Operating method: [30]
➩[XXXX]➩[#]
XXXX indicates: the new 4-digit password
For example: change the system password to 1012
Operating method: [30]
➩[1012]➩[#]
LCD display:
6.6.1 Change Program Password
Program password is the password you should input in order to setup the
system.