User manual

Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page １３ of 35 Ver 2.1
2) Wired strobe siren
3) wireless outdoor siren
Wiring Diagram of Outdoor siren for WL1014
6. Settings
6.1 Enter Settings
In the state of disarm, input 4-digit password by the keypad on the main
unit and press [#] button to confirm. You will hear a voice prompt: please
enter instruction. At the same time, [SET] indicator is on without flashing
and [0000] displays on the screen, indicating the system enters setting
status. You can perform different settings repeatedly as long as the system
keeps in setting status. The system will exit setting mode and return to
disarm status if you don’t press any keypad button for 40 seconds.
Note: In setting status, press
can delete the numbers input.
The system default password is [8888].
Operating method: [XXXX]
➩[#]
X indicates the new 4-digit password.
LCD display: