Technical data

H1105
H1240
56
Regulators
Flowmeters
Regulators
Flowmeters
HEAVY DUTY FLOWMETERS
Inlet Outlet Recommended
Stock No. Gas Used
Flow Range Tube No. Connection Connection Inlet Pressure
*H1105 Argon/CO
2
0-80 SCFH 13220 1/4” NPT 5/8” - 18 RH 80 PSIG
*H1240 Argon/CO
2
Various 14254 Male Internal 30 PSIG
Selec-O-Gas™ Helium, General
SURGE PROTECTORS - 15001 Series
Fixed flow surge protectors designed for
MIG welding applications, eliminates
sudden rush of shield gas sometimes caused
by accumulator effect of MIG welding system components.
Flows listed are at 30 PSI inlet pressure.
Female thread size 5/8” (16mm) - 18 UNF, male
thread size 5/8” (16mm) - 18 UNF
(connects directly to wire feeder or welder).
Stock No. CO
2
Air Argon Helium Nitrogen Hydrogen Oxygen Orifice Diameter
15001-20 20 24 21 65 25 91 23 .026
15001-30 30 37 32 100 38 140 35 .032
15001-40 39 48 41 129 49 182 46 .037
Flowmeter assemblies are designed to operate at an inlet pressure of 30 PSIG
(except H1105 which is designed to operate at an inlet pressure of 80 PSIG). They
may be attached to regulators or pipeline installations. All flowmeters have 1/4”
(6mm) NPT female inlets.
FEATURE BENEFITS
Flow tube is extra long and is accurate to within 3% of the full scale reading.
Tubes are made of shatter resistant Lexan™.
Flow tube has a unique ball guide which centers the ball in the tube
and keeps it centered. A ball floating in a non-centering tube allows the ball
to float off-center and will result in greater flows than the reading indicates.
Selec-O-Gas™ Flow Tube - Just rotate the outer tube to the scale you desire for:
• Argon • CO
2
• Helium • General/Any Gas
Shatter resistant Lexan™ tube
15001-30
H2230
2
1
NOTE: Read center of ball
on all Smith Flowmeters
1 Year Limited Warranty
Surge Protector
H2231
STANDARD DUTY FLOWMETER
Inlet Outlet Recommended
Stock No. Gas Used
Flow Range Tube No. Connection Connection Inlet Pressure
H2230 Econ. Argon,CO
2
Various
N/A 1/4” NPT 5/8” - 18 RH 50 PSIG
Multi-Scale Helium, Male Internal
H2231 Econ.
Argon/CO
2
Mix 5/8” - 18 RH
Multi-Scale
External
CAUTION: Do Not Connect Flowmeters Directly to Gas Cylinder.
NOTE: When using Argon/CO
2
mix, read Argon scale.
* H1105 supercedes H1103; H1240 supercedes H1230E.