Technical data

JX16 Aluminum Extrusion Cutting Tip Oxy-Propane or Natural Gas
Used to “cut” aluminum extrusions - actually melts the aluminum rather than cutting it as a standard tip cuts steel for a straight
edge cut. The JX16 is perfect for use in aluminum extrusion mills and in any other situation where similar cuts are needed.
Can also be used as a heating tip. May also be used to texturize stone/brick. Uses LP Gas or Natural Gas with Oxygen.
The head of the JX16 contains 42 orifices, drill sizes #60.
USED IN:
Torch Handle - SW1B & WH200.
46
Heavy Duty / Oxy-LP
Heavy Duty / Oxy-Propane
Special Purpose Heating Tips
Special Heavy Duty Heating Tip
Tips
Propane Consumption Heat Output
Tip Pressure (PSIG) (SCFH) BTU/Hour
Number Nat. Gas Oxy. Propane Oxy. Fuel Oxy. Propane Nat. Gas
JX16 25 80 25 60 128 502 297,000 130,000
Length - 14-1/2” (368mm)
Head Size
1” X 3-9/16” X 1/2”
(25.4mm X 90mm X 13mm)
JX16
Tip End Illustration
NE170 Propane/Natural Gas
Compressed Air Heating Tip
Produces concentrated flame not normally possible with low
cost natural gas. Ideal for a wide range of heating
applications including die casting. Produces temperatures of
3400˚F with natural gas and 3500˚F with propane.
Operates on gas pressures of 2-10 PSIG and 10-100 PSIG
compressed air. For maximum heat output, a minimum of 30
PSIG air is required. Fits WH200 handle.
NE170
Length 15-5/8”
Weight 2 lbs., 3 oz.
Stock Consists of:
No. Gas Mixer Tip Head Gooseneck
NE170 ST625B NE171 NE171-1
86,000 BTU’s/HR
MANIFOLDING CYLINDERS: When required
flows (cubic feet per hour - SCFH) exceed the
recommended withdrawal rate from one cylinder
then additional cylinders must be manifolded to
provide safe and efficient operation.
WARNING!
CAUTION: When using liquid oxygen, tips may
require greater gas volume than a single cylinder
is capable of producing. External evaporators or
manifolding multiple cylinders may be necessary
to supply sufficient gas flows.
15674
Thermite Heating Tip
(Railroad)
Five minute style heating tip for
thermite rail welding.
Gas Pressures:
Oxygen ..........................65 PSIG
Propane..........................15 PSIG
Gas Consumption:
Propane.........................70 SCFH
Oxygen .......................275 SCFH
BTU Output: . . . . . . . .150,000
Fits SW1A, SW1B or WH200 handles.
Overall length 15-1/2”.