Technical data

Tips
Heating Tips
Heavy Duty / Propylene
45
MT810
Actual Size
MT810 Head
Actual Size
MT615 Head
ST815 - Medium capacity tip:
Use in WH200 &
SW1B handles.
Torch Head Stock No. 4642
ST815
ST825
Actual Size
ST815 Head
Actual Size
ST825 Head
ST825 - High capacity heating tip:
Use in WH200 & SW1B torch handles
with 3/8” (10mm) I.D. hoses.
Torch Head Stock No. 4639
Stock No. of Uses Pressures (PSIG) Consumption (SCFH) Average **Fuel Overall
No. Flames Oxygen Fuel Gas Oxygen Fuel Gas BTU Cylinders Required Length
MT615 Fluted Propylene 20-60 10-25 235-430 100-160 280,000 2 19”
(483mm)
MT810 12 15-35 40-70 120-160 42-58 115,000 1 18”
(457mm)
CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors. It may be necessary to increase
outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
Stock No. of Uses Pressures (PSIG) Consumption (SCFH) Average **Fuel Overall
No. Flames Oxygen Fuel Gas Oxygen Fuel Gas BTU Cylinders Required Length
ST815 Fluted Propylene 37-77 13-37 390-655 120-235 415,000 1-2 20-1/2”
(521mm)
ST825 60-110 20-35 580-1500 225-525 830,000 2-5 31”
(787mm)
Medium Duty / Propylene
MT615
MT615 & MT810 - Medium capacity tip: Use in WH100, MW5A & CW5A torch handles.
MT615 Torch Head Stock No. 1495
**Note: Continuous use with 105 lb. propylene cylinders @ 70˚ F.
**Note: Continuous use with 105 lb. propylene cylinders @ 70˚ F.