Technical data

33
Tips
Cutting Tips
Heavy Duty “SC” / Propane, Natural Gas, Propylene
Oxy-Propane
SC40 Series Oxy-Natural Gas
Two-piece medium preheat cutting tips for general hand and machine
cutting with propane, propane base fuel gases and natural gas.
USE IN: All SC & DG Series Hand Torches, Machine Cutting Torches
& Cutting Assemblies.
SC40 Series
Standard Preheat
Two-Piece
Pressure - PSIG Gas Consumption - SCFH Drill Size
Tip Metal Thickness Cutting Oxygen Preheat Kerf Oxygen Fuel Speed Cutting
Number Inches mm Reg. Torch Oxy Propane Width Cutting Preheat Preheat I.P.M. Jet
SC40-0 1/4” 6 30 30 10† 10 .055 40 38 8 22 62
SC40-0 3/8” 10 35 35 10† 10 .055 50 38 8 20 62
SC40-1 1/2” 13 35 35 10† 10 .080 75 38 8 19 56
SC40-1 5/8” 16 40 40 10† 10 .080 85 38 8 17 56
SC40-2 3/4” 19 36 35 10† 10 .095 105 38 8 16 54
SC40-2 1” 25.4 41 40 10† 10 .095 115 38 8 14 54
SC40-2 1-1/4” 32 51 50 10† 10 .095 135 38 8 13 54
SC40-3 1-1/2” 38 42 40 10† 10 .100 170 38 8 12 51
SC40-3 2” 51 47 45 10† 10 .100 180 38 8 10 51
SC40-4 2-1/2” 64 38 35 12† 10 .125 240 65 15 9 45
SC40-4 3” 76 44 40 12† 10 .125 265 65 15 8 45
SC40-4 4” 102 54 50 12† 10 .125 315 65 15 7 45
† Listed pressure for 3-hose machine cutting torches only.
Consumption - SCFH
Pressure - PSIG
Tip Metal Thickness Cutting Oxygen Preheat Kerf Cutting Preheat Consumption Speed Cutting Drill Size
Number Inches mm Reg. Torch Oxy. Propylene Width Oxy. Oxy. Propylene I.P.M. Jet Preheat
SC36-1 1/2" 13 35 35 20 10 .080 75 70 15 19 56 56
SC36-1 5/8" 16 40 40 20 10 .080 85 70 15 17 56 56
SC36-2 3/4” 19 36 35 20† 10 .095 105 70 15 16 54 56
SC36-2 1” 25 41 40 20† 10 .095 115 70 15 14 54 56
SC36-2 1-1/4” 32 51 50 20† 10 .095 135 70 15 13 54 56
SC36-3 1-1/2" 38 42 40 20 10 .100 170 70 15 12 51 56
SC36-3 2" 51 47 45 20 10 .125 180 70 15 10 51 56
SC36-4 2-1/2” 64 38 35 20† 10 .125 240 70 15 9 45 56
SC36-4 3” 76 44 40 20† 10 .125 265 70 15 8 45 56
SC36-4 4” 102 54 50 20† 10 .150 315 70 15 7 45 56
† Listed pressure for 3-hose machine cutting torches only..
SC36 One Piece Oxy-Propylene
Rugged Duty Cutting
One-piece cutting tips designed for cutting dirty or heavily coated metals
for rugged use to include scrapping, heavy construction or where
excessive reflected heat is present.
USE IN:
Cutting Attachments - DG200 & SC200 Series (Maximum size
SC36-4). All SC & DG Series Hand Torches . All Machine Cutting Torches .
SC36 Series