Technical data

29
Recommended
High Flow Regulators
Model Outlet (PSIG)
Number Gas Pressure Type
40-175-540 Oxygen 0-175 Cylinder
40-15-510 LP Gas 0-650 Cylinder
46-175 Oxygen 0-175 Manifold
46-50 LP Gas 0-50 Manifold
40-275-540 Oxygen 0-275 Oxy
*Equipped with stainless steel diaphragm and rear entry
cylinder connection.
Recommended Hose Sizes
& Recommended Pressures
SC50 Series - Propane/Nat. Gas Tips, Sizes 6-9
Minimum Recommended Pressure Settings (PSIG)
Tip Pressure 1/4” Dia. Hose 3/8” Dia. Hose
Size At Torch 50 ft. 100 ft. 50 ft. 100 ft. 200 ft.
SC50-6 92 psig 130 145 117 122 138
SC50-7 95 psig N/R N/R 125 135 146
SC50-8 95 psig N/R N/R 130 140 155
SC50-9 95 psig N/R N/R 130 140 164
N/R - Not Recommended - Note: Smaller tips require less
flow and will operate satisfactory with 1/4” dia. hose.
Part #
H743
(pair)
• The Smith Oxygen Flashback Arrestors shown here
may be used on tips up to size 5.
• Tips ranging from Size 6-9 require high capacity
Oxygen Flashback Arrestors.
We Recommend Ibeda Brand:
Part # - 0701-3021 - Fuel Gas
Part # - 0701-3022 - Oxygen
For more info go to: www.oxyfuelsafety.com
Cylinder Regulator
Manifold Regulator
Available
Regulator Hard Hat
™
protects gauges
from damage.
Part #HB190
Lengths Available
21", 3’, 4’, 5’ & 6’ lengths.
Contact factory for availability
of extended lengths.
SC Series Head Length
Stock No. Angle inch/metric See Pages 32 - 37 For Cutting Tips
SC929 90° 21"/533mm
SC935 75° 3’/914mm
SC939 90° 3’/914mm
SC930 180° 3’/914mm
SC945 75° 4’/1.2m
SC949 90° 4’/1.2m
SC940 180° 4’/1.2m
SC955 75° 5’/1.5m
SC959 90° 5’/1.5m
SC950 180° 5’/1.5m
SC965 75° 6’/1.8m
SC969 90° 6’/1.8m
SC960 180° 6’/1.8m
NOTE: Contact factory for extended lengths.
Oxygen/Acetylene:
SC12-00 thru SC12-6
SC56-1 thru SC56-9
Oxygen/Propane
Oxygen/Propane Based:
SC40-0 thru SC40-4
SC46-2 thru SC46-6
SC50-0 thru SC50-9
Oxygen/Propylene:
SC60-0 thru SC60-6
SC2-2, SC2-4
Available Torch Head Angles
Heavy duty manganese bronze
head. Choice of 75°, 90° and
180°.
Warning!
High flow capacity flashback arrestors must
be attached to the torch before operating!
Hand Cutting Torches
Gas Axe
™
Extra Heavy Duty
Torches