Technical data

AW1A
Versa-Torch
Handle
(“A” hose fittings)
14
Standard Duty
Versa-Torch
™
/ Quickbraze
®
Tip Selection Chart
Kevlar
®
Brazing Hose
14779-4-10
“A” & “B” Fitting Twin Hose
LP
Adaptor
AT41
(injector)
(works to 4 oz.
gas pressure)
Tip Comes With
A3 Tip Ends
For Acetylene
or LP Gas
Screw-On Tip
Available For LP Gas Only
LP2
Twin Flame Tip
T7
Single Flame Tip
S4, S6
AW10A
Versa-Torch
Handle
(“B” hose fittings)
OR
Twin
Flame
Tip
AT400
Flexible
5”
Flexible
Tubes
LP
(Propane, Natural Gas, Propylene)
Kevlar
®
Hose
Features & Benefits
Extremely durable, heat resistant, light weight
and flexible. Excellent for repetitious brazing
operations. (Not recommended for use with
cutting attachment.)
NOTE: For AW1A Handle only.
Quickbraze
®
Tips
Tip Orifice Drill Brazing Brazing No. Recommended Application
No. Diameter Size Capacity In. Cap. mm Flames Fuel Gases & Oxy. Recommendations
SINGLE FLAME TIPS
S4 .025 71 1/4” - 3/8” 6 - 9.5 1 • Leak Repair
S6 .037 63 1/2” - 3/4” 12 - 19 • Capillary Tubes
Any Gas • Evaporator Coils
• Installing Small Valves
• Appliance Repair
TWIN FLAME TIPS (Flexible)
T7 .041 59 5/8” - 1-3/8” 16 - 35 2 • Compressor Lines
• Reversing Valves
Any Gas • Return Bends
• Tight Clearance Brazing
• Appliance Repair
SCREW-ON TIP ENDS FOR AT400 FLEXIBLE TWIN TIP ASSEMBLY
A3 .037 63 3/4” - 1-3/8” 19 - 35 1 Acetylene / LP • Manufacturing Brazing
LP2 .076 48 7/8” - 1-5/8” 22 - 41 1 Natural Gas / LP • Manufacturing Brazing
• Large Diameter Pipe Brazing
• General Purpose Brazing
(See Tip Technical Data On Pg. 12)
Outfits