Technical data

12
Quickbraze
®
Oxy-Fuel Outfits - Refrigeration/Air Conditioning
Caddy Kit - 23-5004A
Tips Supplied Braze To 1-1/8” (29mm)
Brazes solenoid and expansion valves
so quickly that heat is unable to
transfer to internal parts, protecting
them from damage and eliminating
the need for messy and costly
heat sink materials.
Twin flame tips solder coil return
bends quickly and evenly;
concentrated heat will not heat
and loosen surrounding joints.
Twin flame or patented “C” Style
tips quickly braze reversing valves
without burning internal components.
Revolutionary patented “C” style tips
provide 100% flame wrap for fast,
efficient, even heating. Heat
produced is confined to the joint area
protecting surroundings from burning.
“C” style tips also assure even heat on
the blind side of the braze joint.
Accumulators can be brazed
extremely fast by simply laying
the patented “C” style tip near
the joint.
23-5005A
(Adapts to A or B Style
Regulator Connections)
Single Twin “C”
Kit Stock Torch Flame Flame Style Multi-
Number Assembly Tip Tip Tip Flame Regulators Accessories
23-5004A* 11-1114 S6 T7 C2 14711 30-20-540, Cylinder Caddy Carrier, Striker,
"B" - 9/16" 30-15-200 Check Valves & Operations Manual
Hose Fittings
23-5005A** 11-1116 “A” to “B” Hose Adaptors & Operations Manual
"A" - 3/8" (Hose may be attached to “A” or “B” Regulator Fittings)
Hose Fittings
NOTE: All outfits include complete instruction and operation manual. Outfits with regulators, include reverse flow safety check valves.
Quickbraze
®
Tip Data Chart
Outfits
C2
"C" Style Tip
S6
Single Flame Tip
T7
Twin Flame Tip
14711
Heating Tip
*For use with Oxy-Acetylene only.
Gas Pressures Consumption BTU Brazing Capacity No.
Stock PSIG Settings Rate (CFH) Output/Hr Copper Pipe Flames
Number Oxygen Fuel Oxygen Fuel
S4 8 8 0.8 0.6 1,120 1/4" - 3/8" 1
S6 8 8 3.2 3.4 7,360 1/2" - 3/4" 1
T7 8 8 9.8 7.6 12,200 5/8" - 1-3/8" 2
C2* 7 5 6.4 7.2 12,350 1/2" - 1-1/8" 5
C6* 10 8 9.6 10.8 19,720 7/8" - 1-5/8" 7
14711* 12 10 14.7 9.7 13,760 1/2" - 1-5/8" 4
A3 8 8 8.4 7.2 6,600 3/4" - 1-3/8" 1
LP2* 25 10 26 6 14,500 7/8" - 1-5/8" 1