Specifications

SAgent Operation
24-10437-38 Rev. A 4-9
This document contains confidential and proprietary information of Weldex Corporation 9/10/08
4. Click the Set button associated with the presets.
5. Repeat steps 1 - 4 for all presets you want to define for this
camera.
6. To verify preset function, click the correspo
nding numeric button and then
click Move.
 T
o configure guard tour for a selected camera:
1. Click the Set button ass
ociated with Guard Tour.
2. Guard Tour Setting window opens. Se
lect a preset and from the Preset list
and time (in seconds) from the Delay Time list.
3. Click the right arrow button to add the selection to the Guard Tour list.
The left arrow button allows you to remove unwanted items fro
m the list after
highlighting them.
4. Repeat steps 2 and 3 until the Guard Tour is defined.
5. The Guard Tour elements are displayed in the following format: PX(Y),
w
here X is the number of the preset and Y is time in seconds.
6. Click the Te
st button to begin the Guard Tour.
7. Click Set to save the Guard T
our.