Specifications

SAgent System Setup
24-10437-38 Rev. A 3-13
This document contains confidential and proprietary information of Weldex Corporation 9/10/08
Configuring Remote Sites
Once a site has been defined added to the list, it is easily accessible for future
connections.
 T
o define a remote site:
1. Open the Site/File Open window.
2. Under the Remote tab, click the Ad
d button.
3. The Connection Properties (New) window opens.
Fill out the following information:
+ Site Name - Enter a descriptive name for the site. (The name defined here
does not have to match any other setting and does not impact the
connection.)
+ Server IP - If not using DDNS, enter the IP address of the DVR.
If using DDNS, en
ter the Site ID and the DVR ID separated by a point.
For example if the DVR's Site ID is 00:18:9C and the DVR
ID is
01:01:88, enter 00:18:9C.01:00:88.
+ User ID - Enter the user name as created at the DVR.
+ Password - Enter the user’s password as created at the DVR
+ Channel - Specify channels to be displayed. Enter channel numbers
separated by coma and/or channel number range. 
For example, to select channels 1, 2, 3, 4, 5, and 10 enter 1
-5, 10.