Specifications

SAgent System Setup
24-10437-38 Rev. A 3-7
This document contains confidential and proprietary information of Weldex Corporation 9/10/08
Automatically connect to sites where the event occurred – If selected, when sensor
event occurs, image from the connected DVR will be automatically displayed at
SAgent. In order for this feature to work you must first establish connection(s). See
“Establishing Connections” on page 3-12 for details.
Options
Switch from full to normal screen mode when events occur – If selected, SAgent will
automatically change the display from full screen mode to normal screen mode
when an even occurs. This allows you to also view the Event List.
Automatically switch to single screen mode when events occur – If se
lected, when a
motion or sensor event occurs at a specific camera, image from that camera will
display in 1-screen mode.
SAgent User Management
This user management is independent from the DVR's user management and is used
to control access to the SAgent functions.
There is a built-in Administrator account which cannot be deleted or
modified. You
can add, delete, and modify other SAgent user accounts, as well as export and import
user settings to a DAU file.
See “Options Field Definitions: User Management
Tab” on page 3-10 for
description on all items under the User Management tab.
 T
o add/remove SAgent user accounts:
1. In the SAgent main user interface, click the Setup Options button.
2. The Options window opens. Click the User Management tab.