Specifications

SAgent System Setup
24-10437-38 Rev. A 3-3
This document contains confidential and proprietary information of Weldex Corporation 9/10/08
Options Field Definitions: Network Tab
Network Time-Out
Network Time-Out – Specify the time period after which SAgent automatically
disconnects from the DVR if there is no data transmission. Value range: 1 to 60
minutes.
Default – Click this button to restore default values for all fields under the Network
tab.
Reconnection Time Interval – Specify the time period after which SAgent attempts to
reconnect with the DVR after the “Unknown Error” or “Time-Out Error” message.
The default value is 5 seconds. To disable reconnection attempts set this value to 0.
Advanced – Click this button to display the Try Reconnecting Continuously for
Network or Server Error check box.
Try Reconnecting Continuously for Network or Server Error – Select this check box to
enable continuous reconnection attempts.
Buffering Time
Buffering Time – Use this field to adjust buffering time for real time playback. When
you increase buffering, the computer will retrieve more data from the DVR before it
starts displaying the images.
Event Port
Event Port – This port is used for transmitting the event information from the DVR
to be displayed in the SAgent Event List. The default value is 7056. This number
must be set to the same value at the SAgent and at the DVR. Changes to this setting
take effect after the SAgent application is closed and re-started.
DDNS (DDNS Currently Not Supported)
Server Address – Specify the IP address of DDNS server.
TCP Port – Specify the TCP port number to be used for the DDNS service. The
default value is 10000. The TCP port number used for DDNS at the DVR and
SAgent must be the same.
Video Play Options
 To configure video play options:
1. In the SAgent main user interface, click the Setup Options button.