Instruction manual

17
4) OTHER SET
● FACTORY DEFAULTS
All the settings will be restored to the factory
default. However, the settings of PROTOCOL,
BAUDRATE, ADDRESS and LANGUAGE will
not be restored to the default.
● OSD COLOR [BW, R/G/B]
You can set the OSD (On-screen Display) color
to COLOR or B/W.
5) COMMUNICATION
The COMMUNICATION menu is used to
configure the settings regarding UART
communications.
Use the connector of the camera to connect to
UART
Use the ▲▼◀▶switch to specify the protocol
and baud rate for communications.
● PROTOCOL [SAMSUNG, PELCO-P/D, VICON, PANASONIC, PHILIPS,
ERNA, DIAMOND, VCLTP, KALATEL
Select a communication protocol.
● BAUD RATE [2400, 4800, 9600, 19200, 38400
Select a baud rate.
※ Note:
The baud rate differs, depending on the specified protocol.
● ADDRESS [0~255]
Select an address.
6) SYSTEM INFORMATION
You can view the system information including the
protocol, address, baud rate, serial number,
camera version, and EEPROM version.
7) LANGUAGE SET UP
The camera supports 5 different languages. Select a preferred language.