Instruction manual

14
◇ AWC (Auto White Balance Control):If you press the SET switch in the
appropriate item position, Auto White Balance will perform once.
◇ 3200K : Set color temperature to 3200K
◇ 5600K : Set color temperature to 5600K
RED : Adjusts the strength of the red color.
BLUE : Adjusts the strength of the blue color.
R-GAIN/B-GAIN: Enables you to set the current color temperature manually.
BRIGHTNESS: Select a brightness level in switching from setting in DAY
mode to setting in NIGHT mode.
● DIGITAL ZOOM [ON/OFF]
You can set the digital zoom factor and position. If you press the SET switch
with the DIGITAL ZOOM function set to ON, you will seethe appropriate
screen. When the zoom factor and position are defined, the digital zoom
function will operate.
◇ LOCATION:
If you press the SET switch in the condition where the image is enlarged as
much as the ratio setting, you can watch an invisible area of the effective
screen as well using the ▲▼◀▶switch.
※ NOTE:
-The DIGITAL ZOOM function enlarges the pixel itself, which can cause
deterioration of the quality.
● DETAIL [0~3]
Controls the horizontal or vertical distinction.
● V-SYNC [INT,LINE]
Select the vertical sync mode for INT or LINE. If you select INT, the camera
will use the internal synchronization. If selecting LINE, the camera will use
the external power source frequency for the synchronization. You can adjust
the LL-PHASE.
※Note: No input the L-Pulse signal will fix V-SYNC to INT, which can not be
changed.
● AGC COLOR SUP [LOW, MID, HIGH]
Adjust the color scheme according to the AGC value.
● REVERSE [OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or both.
● POSI/NEGA [+, -]
Outputs as it is or mirror the video brightness signal.