Instruction manual

Note : ※

-If you set DIS to ON, the compensation area will be enlarged as set in the

digital zoom factor.

-If you set the digital zoom factor to greater than the enlarged zoom factor for

the compensation, the DIS function will be deactivated.

● DAY/NIGHT[DAY, NIGHT, AUTO, EXT]

◇ DAY If set to DAY, it will be fixed to DAY mode regardless of the ambient

conditions.

◇NIGHT If set to NIGHT, it will be fixed to Black-and-White mode regardless

of the ambient conditions. If you press the SET switch with a NIGHT sub

menu selected, you will see a menu where you can set Burst to OFF/ON. If

BURST is set to ON, the Burst signal will output together with the black-and-

white composite video signal. If BURST is set to OFF, the Burst signal does

not output. You can set the BURST option to OFF/ON, or select to output the

Burst signal in NIGHT mode.

◇AUTO the camera will automatically switch between DAY and NIGHT

modes, according to the lighting condition. If you press the SET switch with

an AUTO based sub menu selected, you will see the appropriate screen.

You can set the BURST option to OFF/ON, or

select to output the Burst signal in NIGHT mode.

You can select from LOW, MID and HIGH for the

brightness of DAY→NIGHT, which is a brightness

level in switching from the color filter to Black-

and-White. Closing to LOW from HIGH will switch

the filter in a low contrast scene. The DWELL

TIME of DAY→NIGHT is a time required to

determine the need for switching the filter. You

can select from LOW, MID and HIGH for the

brightness of NIGHT→DAY, which is brightness

level in switching from the Black-and-White filter to color. Closing to LOW

from HIGH will switch the filter in a low contrast scene. The DWELL TIME of

NIGHT→DAY is a time required to determine the need for switching the filter.

The MASK menu is used to prevent a filter switch error or inability of

determining the switch in existence of a high spot light source at night. If you

press the SET switch in item 1 or 2 of the MASK menu, you will see a menu

where you can specify an area to mask.