Product Manual
Table Of Contents
- Welch Allyn® Spot® Vision Screener Model VS100
- Introduction
- Controls, Display Window, and Connections
- Setting up the Vision Screener
- Vision Screener Operation
- Troubleshooting
- Cleaning the Vision Screener
- Specifications
- Warranty
28 Vision Screener Operation Welch Allyn Spot Vision Screener
For example: If a subject were 2 years and 10 months old, you would enter
2Y10M. Use numeric and alpha characters.
• Gender—Select Male or enter M; select Female or enter F. Alpha characters
only; leaving the field blank will default to no gender identified.
• Eyewear prescription—Select None
, Glasses, or Contacts. By leaving the
field blank, ‘None’ will be set as the default.
After updating the import file:
1. Confirm the file is saved as a Comma Separated Values (.csv) file.
2. Verify file name is ‘SpotSubjects.csv’ or ‘DesiredLocation.csv’.
3. Follow the import procedures to load the file onto the vision screener. To verify the file
was imported successfully: Return to the Home screen and go to the Queue icon to
view the new records.
Note
If labeling your subject file(s) with a location, the vision screener will import all
files found on the USB drive at the same time