Product Manual
Table Of Contents
- Welch Allyn® Spot® Vision Screener Model VS100
- Introduction
- Controls, Display Window, and Connections
- Setting up the Vision Screener
- Vision Screener Operation
- Troubleshooting
- Cleaning the Vision Screener
- Specifications
- Warranty
Directions for Use Vision Screener Operation 25
Monocular Mode
In monocular mode, you will be given the option to choose which eye to screen. This
should be attempted when binocular screening does not capture the subjects’ pupils.
1. Touch the side of the screen that corresponds with the eye you would like to screen.
(OD = subjects right eye; OS = subjects left eye).
2. When complete, you can repeat the process with the other eye by choosing Mono
from the Results Options Menu.
Viewing the Results
The results screen will appear at the end of the screening process.
All results viewing options are in the Tools menu under Results including; defaulting to a
summary screen or the detailed results screen, hiding recommendations or
measurements, cylinder convention options and raw or rounded data.