User's Manual
Table Of Contents
- Welch Allyn® Spot® Vision Screener Model VS100
- Introduction
- Controls, Display Window, and Connections
- Setting up the Vision Screener
- Vision Screener Operation
- Troubleshooting
- Cleaning the Vision Screener
- Specifications
- Warranty
28 Vision Screener Operation Welch Allyn Spot Vision Screener
DRA
F
T
For example: If a subject were 2 years and 10 months old, you would enter
2Y10M. Use numeric and alpha characters.
• Gender—Select Male or enter M; select Female or enter F. Alpha characters
only; leaving the field blank will default to no gender identified.
• Eyewear prescription—Select None
, Glasses, or Contacts. By leaving the
field blank, ‘None’ will be set as the default.
After updating the import file:
1. Confirm the file is saved as a Comma Separated Values (.csv) file.
2. Verify file name is ‘SpotSubjects.csv’ or ‘DesiredLocation.csv’.
0
3. Follow the import procedures to load the file onto the vision screener. To verify the file
was imported successfully: Return to the Home screen and go to the Queue icon to
view the new records.
Note
If labeling your subject file(s) with a location, the vision screener will import all
files found on the USB drive at the same time