Welch Allyn Virtual Channel Client (VCC) Installation guide Software version 1.
ii Welch Allyn VCC software © 2013 Welch Allyn. All rights are reserved. To support the intended use of the product described in this publication, the purchaser of the product is permitted to copy this publication, for internal distribution only, from the media provided by Welch Allyn. No other use, reproduction, or distribution of this publication, or any part of it, is permitted without written permission from Welch Allyn.
1 Virtual Channel Client (VCC) software installation Contents Product overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About this guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing VCC software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Registering the VCC drivers with Citrix® . . . . . . . . .
2 Installation guide Welch Allyn Virtual Channel Client (VCC) software About this guide This guide describes how to install VCC software in a thin-client environment. This guide is written for system administrators and others with a background in information technology.
Welch Allyn VCC software Network configuration Installing VCC software Before you begin • Ensure that the thin-client workstation has the following: • Windows® XP through Windows 8 with a 32- or 64-bit client operating system. • A minimum of 2 MB disk space. • One of the following: • Microsoft® Remote Desktop Connection (RDS) client 5.0 or later. • Citrix client 6.0 or later (required only for Citrix servers). • Ensure that you have administrator rights for this computer.
4 Installation guide Welch Allyn Virtual Channel Client (VCC) software 7. Click Finish. VCC installation is now complete. Registering the VCC drivers with Citrix® If you install Citrix ICA client on your client workstation after installing the Welch Allyn Virtual Channel, follow these steps to install and register the Welch Allyn Virtual Channel plug-in portion for Citrix. Note On Windows Vista and later, you must have elevated administrative privileges to perform this procedure. 1.
Welch Allyn VCC software Network configuration 5 Installing WYSE® for Windows Embedded To install the Welch Allyn Virtual Channel Client (VCC) on a WYSE thin terminal, complete the following steps: 1. Press and hold the Shift key while logging off. 2. Log on as an Administrator. 3. Disable the Write filter. The system reboots. 4. Return to Administrator mode by repeating steps 1 and 2. 5. Install VCC as described in “Installing VCC software” on page 3. 6.
6 Installation guide Welch Allyn Virtual Channel Client (VCC) software Removing VCC software 1. Select Start>Settings>Control Panel. The Control Panel appears. 2. Select Add or Remove Programs. Windows lists the programs on this computer. 3. Ensure that Change or Remove Programs is selected in the left pane. 4. Scroll to the following Welch Allyn program: 5. Select the program. The program listing expands to display additional information and a Change/Remove button. 6.
